document number: 93543 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 1 standard recovery diodes (hockey puk version), 3800 a sd3000c..k series vishay high power products features ? wide current range ? high voltage ratings up to 1000 v ? high surge current capabilities ? diffused junction ? hockey puk version ? case style do-200ac (k-puk) ? lead (pb)-free typical applications ? converters ? power supplies ? high power drives ? auxiliary system supplies for traction applications electrical specifications product summary i f(av) 3800 a do-200ac (k-puk) rohs compliant major ratings and characteristics parameter test conditions values units i f(av) 3800 a t hs 55 c i f(rms) 6230 a t hs 25 c i fsm 50 hz 35 800 a 60 hz 37 500 i 2 t 50 hz 6410 ka 2 s 60 hz 5850 v rrm range 400 to 1000 v t j - 40 to 180 c voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j = 180 c ma sd3000c..k 04 400 500 75 08 800 900 10 1000 1100
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93543 2 revision: 14-may-08 sd3000c..k series vishay high power products standard recovery diodes (hockey puk version), 3800 a note ? the table above shows the increment of thermal resistance r thj-hs when devices operate at diffe rent conduction angles than dc forward conduction parameter symbol test conditions values units maximum average forward current at heatsink temperature i f(av) 180 conduction, half sine wave double side (single side) cooled 3800 (1925) a 55 (85) c maximum rms forward current i f(rms) 25 c heatsink temperature double side cooled 6230 a maximum peak, one-cycle forward, non-repetitive surge current i fsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 35 800 t = 8.3 ms 37 500 t = 10 ms 100 % v rrm reapplied 30 100 t = 8.3 ms 31 500 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 6410 ka 2 s t = 8.3 ms 5850 t = 10 ms 100 % v rrm reapplied 4530 t = 8.3 ms 4135 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 64 100 ka 2 s low level value of threshold voltage v f(to)1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 0.74 v high level value of threshold voltage v f(to)2 (i > x i f(av) ), t j = t j maximum 0.86 low level value of forward slope resistance r f1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 0.08 m high level value of forward slope resistance r f2 (i > x i f(av) ), t j = t j maximum 0.07 maximum forward voltage drop v fm i pk = 6000 a, t j = t j maximum t p = 10 ms sinusoidal wave 1.22 v thermal and mechanical specifications parameter symbol test conditions values units maximum junction operating temperature range t j - 40 to 180 c maximum storage temperature range t stg - 55 to 200 maximum thermal resistance, junction to heatsink r thj-hs dc operation single side cooled 0.042 k/w dc operation double side cooled 0.020 mounting force, 10 % 22 250 (2250) n (kg) approximate weight 425 g case style see dimensions - link at the end of datasheet do-200ac (k-puk) r thj-hs conduction conduction angle sinusoidal conduction rectangular conduction test conditions units single side double side single side double side 180 0.002 0.002 0.001 0.001 t j = t j maximum k/w 120 0.002 0.002 0.002 0.002 90 0.003 0.003 0.003 0.003 60 0.004 0.004 0.004 0.004 30 0.007 0.007 0.007 0.007
document number: 93543 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 3 sd3000c..k series standard recovery diodes (hockey puk version), 3800 a vishay high power products fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - current ratings characteristics fig. 4 - current ratings characteristics fig. 5 - forward power loss characteristics fig. 6 - forward power loss characteristics 40 60 80 100 120 140 160 180 0 500 1000 1500 2000 2500 30 60 90 120 180 a vera g e fo rw a rd c urre nt (a) maximum allowable heatsink temperature (c) conduction angle sd 3 000c ..k se rie s (single side c o oled) r (d c ) = 0.04 2 k/w thj-hs 20 40 60 80 100 120 140 160 180 01000200030004000 30 60 90 180 dc 120 average forward current (a) maxim um allowable heatsink tem perature (c) c onduc tion period sd 30 00c ..k se rie s (single side c o oled) r (d c ) = 0.042 k/w thj-h s 20 40 60 80 100 120 140 160 180 0 1000200030004000 30 60 90 120 180 average forward curren t (a) maximum allowable heatsink temperature (c) con duction angle sd3000c..k series (double side cooled) r (dc) = 0.020 k/w th j- hs 20 40 60 80 100 120 140 160 180 0 1000 2000 3000 4000 5000 6000 7000 30 60 90 180 dc 120 average forw ard current (a) maximum allowable heatsink temperature ( c) conduction period sd3000c..k series (double side cooled) r ( d c ) = 0 .0 2 0 k / w th j- hs 0 1000 2000 3000 4000 5000 6000 7000 0 1000 2000 3000 4000 180 120 90 60 30 average forward current (a) maximum average forward power loss (w ) rms limit con duction an gle sd 3000c..k series t = 180c j 0 1000 2000 3000 4000 5000 6000 7000 8000 0 1000 2000 3000 4000 5000 6000 7000 dc 180 120 90 60 30 average forward current (a) rms limit maximum average forward power loss (w) conduction period sd 3000 c..k series t = 180c j
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93543 4 revision: 14-may-08 sd3000c..k series vishay high power products standard recovery diodes (hockey puk version), 3800 a fig. 7 - maximum non- repetitive surge current single and double side cooled fig. 8 - maximum non-repetitive surge current single and double side cooled fig. 9 - forward voltage drop characteristics fig. 10 - thermal impedance z thj-hs characteristics 5000 10000 15000 20000 25000 30000 35000 0 0 1 0 1 1 num ber o f equal amp litude ha lf cycle current pulses (n) peak half sine wave forw ard current (a) sd3000c ..k series in itial t = 180 c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j at any rated load condition and with rated v applied following surge. rrm 5000 10000 15000 20000 25000 30000 35000 40000 0.01 0.1 1 pulse t ra in d ura tion (s) peak half sine w ave forward current (a) sd 300 0c ..k s e rie s initia l t = 180 c no voltage reapplied rated v reapplied j rrm v e rs us p u ls e t ra in d ura t io n . m a x im um n on re p etitive s urg e c urre nt 100 1000 10000 100000 0.5 1 1.5 2 2.5 3 3.5 t = 25c j instantaneous forw ard voltage (v) instan taneous forward current (a) sd 3000c..k series t = 180c j 0.0001 0.001 0.01 0.1 0.00 1 0.0 1 0 .1 1 10 10 0 s q ua re w a ve pulse d ura tion (s) thj-hs tran sient therm al im pedance z (k/w ) sd 3000c ..k se rie s stea d y sta te v a lue r = 0.042 k/w (single side c o ole d) r = 0.020 k/w (d ouble side coole d) (d c operation ) thj-hs thj-hs
document number: 93543 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 5 sd3000c..k series standard recovery diodes (hockey puk version), 3800 a vishay high power products ordering information table 1 - diode 2 - essential part number 3 - 0 = standard recovery 4 - c = ceramic puk 5 - voltage code x 100 = v rrm (see voltage ratings table) 6 - k = puk case do-200ac (k-puk) device code 5 13 24 6 sd 300 0 c 10 k links to related documents dimensions http://www.vishay.com/doc?95247
document number: 95247 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 26-nov-07 1 do-200ac (k-puk) outline dimensions vishay semiconductors dimensions in millimeters (inches) 74.5 (2.93) dia. max. 67 (2.64) dia. max. quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specifications) 3.5 (0.14) dia. nom. x 1.8 (0.07) deep min. both ends 1 (0.04) min. both ends 47.5 (1.87) dia. max. 2 places 27.5 (1.08) max.
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
